Double Glazed Window Repair
It's worth looking over the warranty that comes with double-glazed windows in the majority of cases. In general, it covers issues with the hardware of the window such as hinges and locking mechanisms in the first 10 years.
A leak in the seal can be the cause of mist between your glass windows. This needs to be addressed immediately to prevent mold or damp growing in your home.
Condensation Between the Windows
If condensation develops between the windows in your home, it's an indication that the seal holding the insulating gas between the panes has failed. This could be a major issue that needs to be dealt with as soon as you can, especially in winter when humidity is at its highest. This can also cause damage to sills and sealants, as well as mould.
Ideally double-glazed windows should not have condensation between the panes. However, it's not unusual to have extreme humidity or a cold snap to cause this problem. Fortunately, it is repairable without having to replace the entire window. A professional can drill tiny holes into the window and spray a special cleaning solution inside. The water is then sucked out of the window, and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.
Condensation can also happen between the windows due to air leakage, or other factors outside the window. If this is the case, it will likely take longer for moisture to collect in the window as the air will need to be warm enough to allow the water molecules to evaporate. In upvc repair , it may be better to replace the double-glazed windows rather than trying to repair the seals on the existing units.
A double-glazed window is constructed from two or three pieces of insulated glass held together by a metal frame. The space between the windows is filled with an insulating gas like Krypton or argon and then sealed. The seal prevents the insulating gases from escaping and also blocks air and moisture from entering the gap.
As the windows get older, the seals weaken and let moisture in the gap between the glass panes. It is crucial to recognize when seals are beginning to leak because it indicates that the double glazing is no longer performing as well as it used to. This can lead to lower energy efficiency, increased heating bills, property damage and the possibility of condensation developing between the windows.
Mist
If you notice condensation on the outside of your windows, it is totally normal - it indicates that your double glazing is in good working order and retaining the heat inside your home. The condensation happens because the air outside is warmer than the glass, and it reaches the dew point of the window prior to the air inside. This is one of the major advantages of having high quality double glazing.
If you notice condensation on the inside of the window, it could be a sign of an issue with ventilation in your home. The excess moisture can't go anywhere else and ends up on the carpets, windows, furniture, and other parts of your home. This can be prevented by having it checked out by an expert and ensuring that there is enough fresh air in the house.
The other reason you might have mist on your double-glazed window is that the seal between the two panes has worn down. This could be due to wear and tear or due to the use of chemical cleaning products. If this happens the best solution is to repair the windows as soon as you can.
Repairing your windows professionally will ensure that they are fog-free free of condensation and free of misting. It's also less expensive than replacing them entirely and will also help you save money on your energy bills.
A window installer registered with FENSA can give you a quote to repair or replace your double-glazed windows. If your windows are very old and have been in use for a while you might want to consider upgrading them to A-rated energy efficient windows.
It is a good idea to keep copies of any warranties or agreements with your window fitters. It will be helpful if you have any future problems with your windows. You can reach out to your window fitters and resolve the problem. This is a better option than simply ignoring the problems, which will only get worse and could cause other issues in your home.
Open or close with difficulty
When double glazed windows become difficult to open and close it's not just a nuisance but it could also result in an increase in energy costs due to the loss of heat and draughts. It can also be a security problem, particularly when the locks aren't functioning properly. It is essential to fix any issues with double-glazed doors and windows as soon as you notice them.
If you've attempted to open your window using one of the easiest methods, such as using an electric screwdriver or tapping the frame with a solid object the issue may be more serious. The window may have moved and needs to be reset or there could be a gap in between glass and frames. In either of these scenarios, you must contact a professional double glazing repair expert to make sure that the proper repairs are done and to prevent future problems.
It's not unusual for UPVC window handle and lock mechanisms to become difficult to operate or get stuck particularly when they're old and worn. This is caused by the accumulation of dirt or grease inside the handle. It can be cured by cleaning it using a uPVC cleaner. If this doesn't help, you can try tapping the uPVC frame with a hard object, such as a screwdriver, taking care not to harm the handle or the window handle mechanism.
If this does not resolve the issue, then the window may have to be replaced, as it is likely that the hinges are no longer in the correct position or the locking mechanisms are damaged. In this situation, seek out a professional UPVC window repair expert.
David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing a double-glazed window that has been blocked or locked. He has a lot of experience in converting old window mechanisms into modern ones. This can save you money on replacing the entire window. Contact us today for more information or a no-cost quote.
Warping
Double glazed windows are often the best option for saving energy in the home. They consist of two separate panes which contain a spacer or dense gas between them. This creates a seal which keeps cold air out and warm inside. However, over time, windows can be damaged or destroyed and require repair. Fortunately, the majority of repairs are easy and can be completed without the expense of replacing the entire window.
Warping is a common problem with double-glazed windows. This happens when the windows begin to flex or twist, or bow. This can impact the structural integrity and insulation properties of the windows. The best way to avoid this issue is to make sure that double-glazed windows are properly installed and maintained regularly.
If your double-glazed windows are beginning to warp, it is important to contact a specialist immediately to stop the situation from worsening. They will be able to examine your windows and determine the root cause of the warping. They will then utilize specific tools to correct the problem and ensure that your windows are sealed again.
Water vapour can trigger this problem, as it can build up between the windows over time. This can be caused various factors like humidity, weather conditions and temperature fluctuations. To address this issue the expert will drill a small hole to let the moisture out. The specialist will use a cleaning agent on the glass to clean it and then apply sealant.
If your windows cannot be shut or opened it could be due to a malfunctioning mechanism or hinges. It is recommended to lubricate the parts of the window before calling a professional since this will often resolve the issue and lessen the necessity for replacements. However, if your windows are quite old or are not providing the insulation you would like to see It is generally better to replace them.